The 12v cordless drill by Hychika combines power, durability, convenience and comfort.
Less weight without compromising durability
Parts like plastic chuck accounts for less overall weight compared with metal one, bringing down the bare machine weight to less than 4 pounds, which is among the lowest range.Typically, cordless drills weigh between 3.5 to 10 pounds.
Enough torque, intuitive adjustment
The torque can go as high as 30Nm, highly adjustable through the 21+1 clutch and 2 gear switch, operation is quite intuitive as the variable speed control goes:
1st gear, runs at 0-400RPM , is a no-brainer for light-duty application.
2nd gear, runs 0-1500RPM, is for heavy duty application. Speed 0 ensures you are under fair protection. When loosen you hand, the machine stops immediately. No flurry at all.
Even though a cordless machine, the double lock design increases the safety factor to the highest level.
Brushed motor for the economies
The 12V drill uses brushed motor that brings down the cost significantly, while still able to circulate for many years at home. If your budget is under 50USD, this is your go-to option for general purpose driving, drilling and fastening.
Soft rubber handle
Soft rubber handle and ergonomic design accounts for every curve and bulge of the hand. This gives you a customized experience. Less fatigue is felt in holding it for an extended period of time .
Front work light
Working light in front illuminates the spot spontaneously as the machine starts, no time lag. A spot-on feature for dark corner or nighttime working.
Battery charging and storing
The battery is fully charged in 1 hour and can last for hours in light duty operation. In heavy duty situations, pairing with a spare battery can keep the machine stay running at your wish.
Battery release bottom and slide in design lends no extra effort for battery releasing and loading.
The drill can stand on battery for upright storage. If there is no flat surface in sight, the belt clip on one side provides an alternative for storing while you are moving around job site.
3/8inch（10mm）auto-lock keyless clutch locks in rods within the range of 1/2-3/8inch super tight. Our kit includes 22pcs accessories: 5pcs of socket, 1 adaptor, 6pcs driver bits, 6pcs HSS bits, 4 spade bits.
Other than this, you can load brushes for cleaning or other purposes also, as long as the rods fit in the chuck.
Reverse and forward switch
With reverse and forward switch for convenience screw driving indicates this drill is not just a drill, but also a screwdriver and may things.